HTZZ-2A transformer resistance tester

transformer resistance tester 1.fast to test,high accuracy,wide measurement range 2.AC and DC power supply

transformer resistance tester,earth resistance tester,DC resistance tester , DC resistance rapid tester, transformer DC resistance tester.

DC resistance measurement of transformer winding is an essential test project during transformer transfer, repair and changing tapping switch. Measuring DC resistance of transformer winding, you can check out weld or connection quality of down-lead, the winding inter-turn short circuit or open circuit, and whether tap-changer is well contacted. In the previous it is generally to use QJ44 double bridge to measure DC resistance, but the measuring current for this type of bridge is mA level current. So measurement will take a long time, and accuracy is lower. In order to change the above situation, our company has developed HTZZ-2A DC Resistance Rapid Tester.

This instrument is a high-precision regeneration product used to replace DC single/double bridge. Equipped with advanced switch power supply technology, the measurement speed of the instrument is faster a hundred times than that of the bridge. Using four and half bits LCD to display the measurement results and  three and half bits LCD to display ambient temperature or test current value, it overcomes the shortcoming of other similar products that it is difficult to read value from the LED display in the sun and possesses automatic arc suppression function. The instrument is characterized by fast test speed, high precision, intuitive display, strong anti-interference ability, small size, low power consumption, stable and reliable test data. Built-in rechargeable battery pack (12V) and AC/DC dual-use, the instrument is very convenient for on-site and field test.

The instrument meets DLT 845.3-2004 "resistance measurement device general technical requirements- Part 3 DC Resistance Tester" requirements.

 

Products features

Fast test.High accuracy.Widely measured range.Applies to AC and DC.LCD display, applies to different working environment .

Technical Specifications

1.Work Environment

Temperature  0°C~40°C  

Relative Humidity ≤85 %

2.Measurement Range

  The instrument has six ranges as follows,

1μΩ~20mΩ;

20 mΩ~200mΩ;

0.2Ω~2Ω;

2Ω~20Ω;

20Ω~200Ω;

200Ω~2kΩ

3.Measurement Accuracy, 0.2 class

4.Maximum Resolution, 1μΩ

5.Constant current source

2A (1μΩ~20mΩ, 20 mΩ~200mΩ, 0.2Ω~2Ω);

200mA (2Ω~20Ω);

20mA (20Ω~200Ω);

2mA (200Ω~2kΩ)

6.Working Voltage

       DC, 11V~14V

       AC ,220V

7.Power Dissipation ≤15W

8.Dimension, 365×330×180mm

9.Weight, 5Kg (included test clamp and test lead)

HTZZ-2A transformer resistance tester